Skip navigation

Please use this identifier to cite or link to this item: http://hdl.handle.net/20.500.12128/12666
Title: Geophysical Evaluation of Effectiveness of Blasting for Roof Caving During Longwall Mining of Coal Seam
Authors: Wojtecki, Łukasz
Konicek, Petr
Mendecki, Maciej J.
Gołda, Iwona
Zuberek, Wacław M.
Keywords: Blasting for roof caving; SMT inversion; seismic source parameters; seismic effect method; longwall mining with caving
Issue Date: 2020
Citation: Pure and Applied Geophysics, Vol. 177 (2020), s. 905-917
Abstract: Deep longwall mining of coal seams is made in the Upper Silesian Coal Basin (USCB) under complicated and mostly unfavourable geological and mining conditions. Usually, it is correlated with rockburst hazard mostly at a high level. One of the geological factors affecting the state of rockburst hazard is the presence of competent rocks in the roof of extracted coal seams, so rock falling behind the longwall face does not occur, and hangingup of roof rocks remains. The long-lasting absence of caving may lead to an occurrence of high-energy tremor in the vicinity of the longwall face. Roof caving behind the longwall face may be forced by blasting. The column of explosives is then located in blastholes drilled in layers of roof rocks, e.g. sandstones behind the longwall face. In this article, a characterization of tremors initiated by blasts for roof caving during underground extraction of coal seam no. 507 in one of the collieries in the USCB has been made using three independent methods. By the basic seismic effect method, the effectiveness of blasting is evaluated according to the seismic energy of incited tremors and mass of explosives used. According to this method, selected blasts gave extremely good or excellent effect. An inversion of the seismic moment tensor enables determining the processes happening in the source of tremors. In the foci of provoked tremors the slip mechanism dominated or was clearly distinguished. The expected explosion had lesser significance or was not present. By the seismic source parameters analysis, among other things, an estimation of the stress drop in the focus or its size may be determined. The stress drop in the foci of provoked tremors was in the order of 105 Pa and the source radius, according to the Brune’s model, varied from 44.3 to 64.5 m. The results of the three mentioned methods were compared with each other and observations in situ. In all cases the roof falling was forced.
URI: http://hdl.handle.net/20.500.12128/12666
DOI: 10.1007/s00024-019-02321-1
ISSN: 0033-4553
1420-9136
Appears in Collections:Artykuły (WNP)

Files in This Item:
File Description SizeFormat 
Wojtecki_Geophysical_evaluation_of_effectiveness.pdf1 MBAdobe PDFView/Open
Show full item record


Uznanie Autorstwa 3.0 Polska Creative Commons License Creative Commons