Skip navigation

Please use this identifier to cite or link to this item:
Full metadata record
DC FieldValueLanguage
dc.contributor.authorBara, Marek-
dc.identifier.citationTribologia, Nr 4 (2014), s. 9-20pl_PL
dc.description.abstractThe article presents the results of tribological measurements of an aluminium oxide layer, obtained on aluminium alloy substrate with different degrees of surface preparation, with a plastic material in sliding cooperation. The utilitarian goal of the research was to reduce an unfavourable influence of oxide layer surface roughness during the abrasive wear process of the plastic material with the layer. The purpose was achieved by determining the effect of surface preparation on the formation of the surface topography and tribological properties of oxide layer of nanoceramics. The testing pin–plane was conducted on friction– wear conditions. The analysis of the tribological results was supplemented by surface morphology studies and stereometric research made before and after the tribological test. The results showed a significant effect of surface preparation on the formation of surface topography and tribological properties of the surface coating.pl_PL
dc.rightsUznanie autorstwa-Na tych samych warunkach 3.0 Polska*
dc.subjecttribological propertiespl_PL
dc.subjectoxide layerspl_PL
dc.subjectaluminum etchingpl_PL
dc.titleOcena wpływu przygotowania podłoża na właściwości tribologiczne nanoceramicznych warstw tlenkowychpl_PL
dc.title.alternativeAn estimation of the influence of the substrate preparation on tribological properties of nanoceramic oxide layerspl_PL
Appears in Collections:Artykuły (WNŚiT)

Files in This Item:
File Description SizeFormat 
Bara_Ocena_wplywu_przygotowania.pdf1,2 MBAdobe PDFView/Open
Show simple item record

Uznanie autorstwa na tych samych warunkach 3.0 Polska Creative Commons License Creative Commons