Skip navigation

Zastosuj identyfikator do podlinkowania lub zacytowania tej pozycji:
Tytuł: Influence of cooling rate on structural and magnetic properties of (Fe78Nb8B14)1-xTbx alloys
Autor: Ziółkowski, Grzegorz
Chrobak, Artur
Klimontko, Joanna
Chrobak, Dariusz
Randrianantoandro, N.
Słowa kluczowe: Cooling rates; magnetic properties
Data wydania: 2017
Źródło: AIP Advances, Vol. 7, iss. 5 (2017), art. no. 056235, s. 1-6
Abstrakt: In the presented work we are focused on the influence of cooling rate on structural and magnetic properties of (Fe78Nb8B14)1-xTbx (x = 0.08, 0.1, 0.12) nanocrystalline bulk alloys. The samples were fabricated using the vacuum suction technique with different cooling rates controlled by different sample diameters (from 0.5 to 1.5 mm). The increased Nb content leads to the formation of specific microstructure and allows obtaining ultra-high coercive alloys just after casting without any additional treatment. The coercivity exceeds 8.6 T at the room temperature in case of optimal chemical and preparation conditions (x = 0.12, d = 0.5 mm) and 5.6 T for x = 0.1. The impact of Tb content as well as the cooling rate on magnetic and structural (XRD, SEM, MFM) properties is widely discussed in the context of reduction of rare earths in the RE-based permanent magnets.
DOI: 10.1063/1.4978698
ISSN: 2158-3226
Pojawia się w kolekcji:Artykuły (WMFiCH)

Pliki tej pozycji:
Plik Opis RozmiarFormat 
Ziolkowski_Influence_of_cooling_rate_on_structural_and_magnetic_properties_of.pdf8,63 MBAdobe PDFPrzejrzyj / Otwórz
Pokaż pełny rekord

Uznanie Autorstwa 3.0 Polska Creative Commons Creative Commons