Skip navigation

Please use this identifier to cite or link to this item: http://hdl.handle.net/20.500.12128/12334
Full metadata record
DC FieldValueLanguage
dc.contributor.authorNiedźwiedź, Mateusz-
dc.contributor.authorSkoneczny, Władysław-
dc.contributor.authorBara, Marek-
dc.date.accessioned2020-01-30T14:26:47Z-
dc.date.available2020-01-30T14:26:47Z-
dc.date.issued2020-
dc.identifier.citation"Coatings" Vol. 10, iss. 2 (2020), art. no. 105pl_PL
dc.identifier.issn2079-6412-
dc.identifier.urihttp://hdl.handle.net/20.500.12128/12334-
dc.description.abstractThe article presents the influence of the anodic alumina coating nanostructure produced on aluminum alloy EN AW-5251 on the type of tribological wear process of the coating. Oxide coatings were produced electrochemically in a ternary electrolyte by the DC method. Analysis of the nanostructure of the coating was performed using ImageJ 1.50i software on micrographs taken with a scanning electron microscope (SEM). Scratch tests of the coatings were carried out using a Micron-Gamma microhardness tester. The scratch marks were subjected to surface geometric structure studies with a Form TalySurf 2 50i contact profiler. Based on the studies, it was found that changes in the manufacturing process conditions (current density, electrolyte temperature) affect changes in the coating thickness and changes in the anodic alumina coating nanostructure (quantity and diameter of nanofibers), which in turn has a significant impact on the type of tribological wear. An increase in the density of the anodizing current from 1 to 4 A/dm2 causes an increase in the diameter of the nanofibers from 75.99 ± 7.7 to 124.59 ± 6.53 nm while reducing amount of fibers from 6.6 ± 0.61 to 3.8 ± 0.48 on length 1 × 103 nm. This affects on a change in the type of tribological wear from grooving to micro-cutting.pl_PL
dc.language.isoenpl_PL
dc.rightsUznanie autorstwa 3.0 Polska*
dc.rights.urihttp://creativecommons.org/licenses/by/3.0/pl/*
dc.subjectAluminum oxide layerspl_PL
dc.subjectNanostructurepl_PL
dc.titleThe influence of anodic alumina coating nanostructure produced on EN AW-5251 alloy on type of tribological wear processpl_PL
dc.typeinfo:eu-repo/semantics/articlepl_PL
dc.identifier.doi10.3390/coatings10020105-
Appears in Collections:Artykuły (WNŚiT)

Files in This Item:
File Description SizeFormat 
Niedzwiedz_The_influence_of_anodic_alumina_coating_nanostructure.pdf9,66 MBAdobe PDFView/Open
Show simple item record


Uznanie Autorstwa 3.0 Polska Creative Commons License Creative Commons